Appalachian Armament - Product Detail - ALIGNMENT ROD 9MM 12" PISTOL LENGTH - $73.49

ALIGNMENT ROD 9MM 12" PISTOL LENGTH

9MM SUPPRESSOR ALIGNMENT ROD 12" PISTOL LENGTH
Item: AS343712  Ample Stock
  Manufacturer: Accuracy Solutions
(0 reviews) Write A Review
Share:
MSRP: $75.00 Your Price: $73.49
Item Comments:
Qty to Add:
SUPPRESSOR ALIGNMENT ROD
  • Verify proper suppressor alignment and avoid baffle strikes.
  • Precision-machined rod will show any deviation in alignment
  • The Suppressor Alignment Rods are available for most popular calibers
  • Bore Alignment Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. The Bore Alignment Rod closely represents the bullet flight path and will show any misalignment, if present. Use the Bore Alignment Rod to verify barrel-to-adapter-to-suppressor alignment on any new build or any previously un-shot setup. Simply choose the corresponding rod for your caliber rifle or carbine.
DUE TO THESE RODS BEING PRECISION INSTRUMENTS, THEY ARE NOT RETURNABLE.

Why should I use a Suppressor Bore Alignment Rod?
  • Suppressor Bore Alignment Rods are valuable tools that will ensure proper concentricity along the bullet flight path when firing suppressed on a new platform. A suppressor alignment rod closely represents the bullet flight path and will show any misalignment, if present. It is highly recommended to check suppressor alignment each time the suppressor is mounted to your firearm; especially if it has a non-tapered thread system.
  • Use our bore suppressor alignment rods to verify barrel-to-adapter-to-suppressor alignment on any new build or any previously non fired setup.
  • Use our rods to verify proper suppressor alignment and avoid suppressor damage and baffle strikes. Our precision-machined rods will show any deviation in alignment.
Watch Mike Pappas with Dead Air Silencers explain the importance of concentricity and alignment of your rifle and suppressor. 

How do I choose and use my Bore Alignment Rod?

Simply choose the corresponding bore alignment rod for your caliber rifle or carbine. Rods measure 16" in length.
  • When using your bore alignment rod, verify your firearm is unloaded. 
  • Always use alignment rod in clean rifle bore.
  • Lightly lube alignment rod with preferred gun oil.
  • Your alignment rod is a precision instrument. Alignment Rods will bend! Be careful, especially when inserted in the rifle bore. A lot of leverage can be placed on the alignment rod by bumping it or pulling sideways.
  • Never force rod into bore, it should slide freely with very little resistance.


THESE RODS ARE PRECISION INSTRUMENTS!

Alignment rods are manufactured from 304L Stainless Steel. Rods measure 16" long, are bore specific and accurate in diameter to +.000/-.001”. Rods are labeled by caliber and packaged in clear PETG storage tubes that can be hung from one end.

We have bore alignment rods for most popular calibers.

Be the first person to review this product You must be logged in to write a review